Many intend to buy water jet users will in the end is the purchase of cantilever waterjet or Longmen water - this issue very entanglements, the main reason is that the advantages and disadvantages of these two kinds of water jet are not clear.
Longmen type water jet cutting platform is one of the entire structure, the advantage of this is that the cutting arm are arranged at the two ends of the support, is not easy to incline, even long-term use is not easy to develop cutting error. The shortcoming is that because it is a whole body, so the whole block is more also, cutting tools, some irregular not too good in, but also for the platform the size of adjustment can not be.
The cutting arm rail cantilever water jet and the cutting platform is separated, the benefits of doing so is to the workpiece many irregular could easily into the cutting. And later if you want to change the point of the platform is also very convenient, only need to purchase or manufacturing a new cutting platform can, thus saves the cost. But the drawback is that because the cantilever waterjet cutting arm only with one end fixed support, so if in the factory failed to adjust the calibration precision of the cutting, the cutting out of workpiece is difficult to qualified.
From the analysis of advantages and disadvantages of these two kinds of water jet cutting workpiece, if the comparison rules, mainly to do a supporting the processing for their own factory production product, choose Longmen waterjet is quite good. But if cutting foreign processing business more words is also preferably cantilever is most suitable for water jet. But in the end for the intention to purchase the cantilever water jet users still have some reminders, as I said above water if the cantilever at the factory did not adjust well the words on the accuracy, the use of in the future will be very troublesome, so the water jet before leaving the factory better able to personally look under the cutting precision.
